Hunter Panels CAV-GRIP is a versatile, low-VOC aerosol contact adhesive designed to enhance bonds for self-adhering sheet products and polyiso insulation boards. It’s built for professional installers who want strong adhesion with quick drying and minimal on-site mess.

Key Features & Design

• Low-VOC, methylene chloride-free formula
• The self contained spray system delivers a low-pressure web, which allows quick and even coverage without bounce-back.
• 40 pressurized aerosol cylinders with a special attachment for a spray hose and gun.
• With proper operation, requires no clean-up or maintenance.
• Ideal for enhancing the bond of Xci Vapor Permeable Self Adhesive Water Resistant Barrier to various substrates.
• Ideal for bonding polyiso insulation boards to substrate, including surface of waterproofing and air/vapor barrier membranes.
• Propellant in cylinders needs to be maintained above 60°F for the product to spray well.
• Cylinders can be kept warm on the job site by placing them in a cooler with a heating pad.
• For application at ambient temperature below 60°F, store cylinders in heated space and move to project area during application.
• Dispense product from cylinder while it is still warm.
• Application notes: Connect gun to hose and connect hose to cylinder. Use lithium grease or petroleum jelly on all fittings and take care not to cross-thread them. Open valve on cylinder to check fittings for leaks.
• Keep gun perpendicular to surface during spray and apply CAV-GRIP in thin, even coating to substrate. Avoid high thickness build-up.
• To adhere to the substrate with CAV-GRIP, allow it to dry until it does not transfer to finger when touched. Limit application of CAV-GRIP to surfaces that will be covered with the barrier that same day.
• Cleanup: Use safe solvent to remove from skin. Safe solvent or mineral spirits can be used to clean tools and surfaces.

Application & Usage

For best results, connect the spray gun to the hose, attach to a cylinder, and maintain cylinder temperature as noted. Apply in a thin, even coating and keep the gun perpendicular to the surface. Allow the adhesive to dry to a touch-safe state before placing the barrier. If temperatures are cool, keep cylinders warm and spray while warm to ensure a consistent spray pattern and bonding performance.